PowMr MPPT Solar Controller 60AMPS

$149.00$200.00 (-26%)

In stock

Afterpay available between $300.00 - $2,000.00 Learn More

Features:

1. 12v/24v/36v/48v Auto Switch
2. MPPT Technology. Max efficiency ≥98.1%, PV utilization ≥99%
3. Fit for Lithium/Vented/Sealed/Gel/NiCd batteries
4. Troubleshooting will be prompted
5. Two terminals for each positive and negative on solar panels and battery terminals

Note:  A space of 15cm must be left open around all sides of the controller to ensure correct airflow

Warranty:  2 Years

Compare

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, PowMr maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. PowMr maintains battery health, extending its life.

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT
controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10%
compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output
will disconnect the load when the battery has been discharged to a pre-set voltage.
Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote
control connected to the load output. A special interface cable may be needed, please see the manual.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the
result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of
discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within
weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly
increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is
sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level
will be modulated so that a nearly 100% recharge is achieved about once every week.

Specifications:

60A MPPT Solar Charger Controller for 12V/24V/36V/48VDC Batteries

100% MPPT controller
Intelligent Maximum Power Point Tracking technology

Built-in DSP controller with high performance

Automatic battery voltage detection 12V/24V/36V/48V

Three-stage charging optimises battery performance

Multi-function LCD displays

Reverse polarity protection of solar panel

Overcharge protection

Can be mounted easily

Suitable for battery types of sealed lead acid, vented Gel, and Lithium battery

Notes: The output terminal is for lamp only ( 12V system less 60W, 24V/36V/48V system less 100W ),

and it will be burnt if connecting to other loads. The output for the battery is no polarity reverse protection.

DATA SHEET:

Model No

MPPT-30A

MPPT-40A

MPPT-50A

MPPT-60A

Charging mode

MPPT Maximum power point tracking automatically

Charging

3-stageconstant current(MPPT), constant voltage(Absorption Voltage), floating charge

System type

DC12V/24V/36V/48V Recognition automatically

System voltage automatic recognition

12V system (DC9V-DC15V)     24V system (DC18V-DC29V)

36V system (DC30V-DC39V)   48V system (DC40V~DC60V)

Soft start time

≤1S

≤1S

≤1S

≤1S

Dynamic response and recovery time

100us

100us

100us

100us

Max efficiency

≥98.1%  (Voc is 1.5 or 2 times than battery, then it’s best efficiency)

PV utilization

≥99%

≥99%

≥99%

≥99%

Input specification

Voc from PV ( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency. )

12V system (DC20V~DC80V)  24V system (DC37V~DC105V)

36V system (DC50V~DC160V)  48V system (DC72V~DC160V)

The maximum PV input voltage (Voc)

DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.)

The maximum PV input power

(The total power rated of PV can’t be over this watt that will break the controller.)

12V system (400W)

24V system (720W)

36V system (1000W)

48V system (1200W)

12V system (480W)

24V system (960W)

36V system (1400W)

48V system (1700W)

12V system (600W)

24V system (1200W)

36V system (1800W)

48V system (2200W)

12V system (720W)

24V system (1440W)

36V system (2100W)

48V system (2800W)

Output specification

Selectable battery type(default is Sealed)

Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user)

Absorption Charging Voltage

Refer to Batteries charging reference

Floating Charging Voltage

Refer to Batteries charging reference

Overcharging protection voltage

12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V)

Rated output current

30A

40A

50A

60A

Temperature Coefficient

±0.02%/ centi-degree

Automatic temperature compensation

14.2V-Max temperature-25 centi-degree*0.3

Output voltage ripple-peak

100mV

100mV

100mV

100mV

Output voltage accuracy

≤±1%

≤±1%

≤±1%

≤±1%

Indicating

 

 

 

 

LCD display

See LCD display instruction

See LCD display instruction

See LCD display instruction

See LCD display instruction

LED display

CPU working indicator

CPU working indicator

CPU working indicator

CPU working indicator

Protection function

Output over-voltage protection

See output specification

See output specification

See output specification

See output specification

Input Anti-intrusion protection

yes

yes

yes

yes

Temperature Protection

75 centi-degree

75 centi-degree

75 centi-degree

75 centi-degree

Temperature increased protection

Output power will reduce when it’s more 70 centi-degree.

Output power will be normal when it’s less 55 centi-degree.

Fan-on temperature

>40 centi-degree

>40 centi-degree

>40 centi-degree

>40 centi-degree

Fan-off temperature

<35 centi-degree

<35 centi-degree

<35 centi-degree

<35 centi-degree

Other parameters

 

 

 

 

Acoustic noise

≤40dB

≤40dB

≤40dB

≤40dB

Cooling way

Forced air cooling.

Components

Imported materialsAccord  to EU standards, Industrial grade range.

Environmental requirements

Meet 2002/95/EC; No cadmium, hydrides and fluorides

Properties

Size (mm)

215x115x50

215x115x50

215x115x50

215x115x50

Net weight(Kg)

1.1

1.1

1.1

1.1

Gross weight(Kg)

1.2

1.2

1.2

1.2

Security Level

According to CEPSEFCCEMC,EN60950

Electromagnetic Compatibility

According to EN61000EN55022EN55024

Enclosure

IP21

IP21

IP21

IP21

Additional information

Weight1.5 kg
Dimensions26 × 27 × 7 cm
Average Rating

4.67

03
( 3 Reviews )
5 Star
66.67%
4 Star
33.33%
3 Star
0%
2 Star
0%
1 Star
0%

Only logged in customers who have purchased this product may leave a review.

3 Reviews For This Product

  1. 03

    Michael Demetrova (verified owner)

    Really good customer service, fast delivery, awesome price for the product. Highly recommend.

  2. 03

    Byran Ashley (verified owner)

    Really good price

  3. 03

    Brett Dennis (verified owner)

    Apart from delivery guy not understanding you don’t turn upside down an item that has “this side up” written on it. All good

Main Menu

PowMr MPPT Solar Controller 60AMPS

$149.00$200.00 (-26%)

Add to Cart