GFB Brand New Automotive Grade LiFePO4 3.2V 100Ah Rechargeable Prismatic Battery Cell DIY Lithium Iron Phosphate
$129.00 – $2,064.00 (-19%)

Enjoy Free Shipping when you order 4* 100Ah LiFePO4 cells or more.
If your configuration is different from TYPE A B C or D, please contact Big Wei Battery before you place the order.




About the Lithium Cell:

- Nominal voltage: 12.8V
- Discharge Cut-Off Voltage: 10V
- Charge Cut-Off Voltage: 14.6V
- Standard Discharge: 50A (0.5C)
- Standard Charge: 50A (0.5C)
- Fast Charge: 0.5C
- Fast Discharge: 1C
- Maximum Charge Current: 1C
- Maximum peak discharge current: 2C
- Weight: 2.25kg per cell
- Cycle life- >2000+ times.

Description/Item | Specifications | Remarks |
Standard Charge Current | 0.5C | |
Standard Charge Voltage | < 3.65V | |
Standard Charge Mode | Using 0.5C Constant Current (CC) to charge to 3.65V, then Constant Voltage (CV) at 3.65V to charge until the charge current reaches the lower limit of 5.0+ 0.5A. | |
Standard Charge Temperature | 25°C | Cell Temperature |
Absolute Charge Temperature | 0-55°C | Terminating charge process, once the cell temperature is beyond Absolute Charge Temperature. |
Absolute Charge Voltage | <3.8V | Terminating charge process, once the cell OCV is beyond Absolute Charge Voltage. |
Cell Temperature | Standard Charge | Rapid Charge | Cell Temperature |
<0°C | Prohibited to charge | Prohibited to charge | <0°C |
0-10°C | Charge Current 0.1C | Prohibited to charge | 0-10°C |
10-15°C | Charge Current 0.2C | Charge Current 0.3C | 10-15°C |
15-25°C | Charge Current 0.3C | Charge Current 0.5C | 15-25°C |
25-45°C | Charge Current 0.5C | Charge Current 1.0C | 25-45°C |
45-55°C | Charge Current 0.3C | ||
>55°C | Prohibited to charge |
Description | Parameters | Remarks | |
Standard Discharge Current | 50.0A | * 25°C | |
Maximum Continuous Discharge Current | 100.0A | * N.A. | |
Maximum Discharge Long-Pulse Current | 200.0A | * 3 minutes maximum | |
Maximum Discharge Short-Pulse Current | 300.0A | * Cell temperature lower than 50°C * When SOC>40%, 60s maximum * When SOC<40%, 10s maximum | |
Discharge cut-off Voltage | >2.5V | * N.A. | |
Standard Discharge Temperature | 25°C | * Cell Temperature | |
Absolute Discharge Temperature | -20–55°C | Regardless of the discharge mode, the discharge process should be terminated, once the cell temperature is beyond Absolute Discharge Temperature. |
Description | Parameters | Remarks |
Charge cut-off Voltage | 3.65V | Terminating charge process when cell OCV reaches 3.65V. |
First Over-charge Protection | >3.8V | Limiting charge current to 0 when cell OCV reaches 3.8V. |
Second Over-charge Protection | >4.0V | Limiting charge current to 0 when cell OCV reaches 4.0V. Locking BMS before the problem is identified and resolved. |
Discharge cut-off Voltage | 2.5V | Terminating discharge process when cell OCV reaches 2.5V. |
First Over-discharge Protection | 2.0V | Limiting discharge current to 0 when cell OCV reaches 2.0V. |
Second Over-discharge Protection | 1.8V | Limiting discharge current to 0 when cell OCV reaches 1.8V. Locking BMS before the problem is identified and resolved. |
Short Circuit Protection | Prohibit Short Circuit | Cutting off overcurrent devices (fuses, circuit breakers). |
Charging Time Protection | <8h | Terminating charge process when charging time exceeds 8 hours. |
- Safety Pressure Release Valve
- Standard new safety technology for high-quality batteries.
- Prevents explosions caused by excessive internal pressures due to overcharging, short circuits, excessive temperature, battery deformation, or puncture.
- The safety valve on top is very important for the explosion-proof barrier. When the pressure inside the battery is built up, the safety valve opens to avoid an explosion.
- No Memory Effect
- Rechargeable batteries work under conditions that are often not fully discharged, and the capacity will quickly fall below the rated capacity. This phenomenon is called the memory effect. There are memories like nickel-metal hydride and nickel-cadmium batteries, but lithium-iron phosphate batteries do not have this phenomenon. No matter what state the battery is in, it can be used with charging, no need to discharge and recharge.
Warranty:
We are pleased to inform you that this product has successfully passed the rigorous Quality Check.
However, please note that we do not provide a warranty for this item, as we are unable to control how it will be utilized in your specific application.
For optimal usage, we highly recommend consulting with a qualified and certified technician, particularly if you are unfamiliar with operating this type of equipment.
In the event that you encounter any difficulties with the cells, we regret to inform you that we do not offer direct support for it.
Nonetheless, we are confident that with proper installation and careful attention to detail, you can prevent any potential damage from occurring.
We sincerely appreciate your understanding and cooperation in ensuring the proper use and installation of this product.
You may also like
Reviews
Average Rating
4.83
Only logged in customers who have purchased this product may leave a review.
Steven L. (verified owner) –
This company is awesome to deal with…very helpful…based in brisbane and can ring and talk to on the phone…had everything in stock to DIY 2 x 36V 100ah Lithium LiFeP04 batteries for a 36V MinnKota for under 3K…dispatched same day…highly recommended
Victor D. (verified owner) –
very helpfull excellent fast delivery well done
Victor Dennis (verified owner) –
great service very helpfull
Tim (verified owner) –
Product meets or exceeds rated capacity
Robert Kingscott (verified owner) –
dont like the look of the interconnects, i replace with solid copper.
Russell T. (verified owner) –